Cisco Anyconnect Secure Mobility Client Installation Success Or Error Status 16

by

This document briefly describes the possible error messages that appear during the installation of AnyConnect VPN client on Apple MAC machines and their corresponding resolutions. There are no specific requirements for this document. The information in this document is based on these software and hardware versions: • Cisco ASA Security Appliance that runs software version 8.x • Cisco IOS ® Router that runs Cisco IOS Software Release 12.4(20)T • Cisco AnyConnect Client software version 2.x The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration.

320x240, 400x240, 480x320, 640x480, 800x480, 854x480, 960x540, 1024x600, 1024x768, 1280x720, 1280x800, 1920x1080, 1920x1200, 2560x1600 All languages for interface and voice, full Europe maps with POI, buildings, for all resolutions in one pack. *Requirements: Android v2.2+ *iGO MY WAY 2009 must uninstall.APK before install iGO Primo, and delete iGO folder or rename to iGO_old if you want again use later. + buildings, POI, vioces, phoneme, Speedcam etc. Igo primo data zip 1920x1080 pictures of the world. *Select your screen resolution and follow the instructions *If your display is not full you must adjust with program Screen Size and Density 1.1.apk *For mapchanger read instructions change maps between NAVTEQ, TOM TOM, TOPMAP, OTHER *If you not see skin in SCREEN theme day/night, you must write info.ini file and add your resolution *all.7z files extract with 7zip or and extract with Winrar 4.20 *branding.zip, data.zip, skin.zip or other.zip open/change only with Total commander or under winrar 4.00. Above winrar 4.00 not work change.zip files in igo *Be sure to read all instructions before you do anything you ask.

I spent my entire evening yesterday and most of tonight trying to install the Cisco VPN Client for 64-bit. I had been using Shrew VPN (freeware) and it worked fine with my Cisco.PCF file, but now they’ve reconfigured my VPN at work and it’s “Cisco or death” (long story). Aug 30, 2018 - Error: 'The AnyConnect package on the secure gateway could not be. Error: 'This installation package could not be opened. Others are able to connect successfully through AnyConnect VPN. The error code is 2911. Error occurs when the AnyConnect mobility license is missing. Time: 16:29:09.

If your network is live, make sure that you understand the potential impact of any command. Refer to for more information on document conventions.

This section shows a list of error messages along with the solutions. When AnyConnect 2.3 is launched from an Apple MAC machine, the Anyconnect Package corrupt or unavailable error message appears and eventually, the connection attempt fails. This can be a problem with the absence of the MAC-related AnyConnect package on the flash of the router. Upload the suitable AnyConnect package for MAC in order to resolve this issue. Upload the corresponding AnyConnect package, which depends upon the MAC architecture. For MACs on the Intel processor, you need the i386 macos image and for MACs that run the Power PC processor (PPC) you need the powerpc macos image. These are example packages for your reference: • anyconnect-macosx-i386-2.5.3055-k9.pkg • anyconnect-macosx-powerpc-2.5.3055-k9.pkg When split DNS is enabled on an AnyConnect setup, it is found that all the DNS queries are sent in clear but not tunneled.

This is a problem with only the Apple MAC machines and works fine with Windows machines. This behavior is observed and filed in Cisco bug ID ( customers only). In order to resolve this issue, you can upgrade to the AnyConnect release 3.0.4235, which has the.

As a workaround, you can also use the built-in IPSec VPN client supported by Apple, which does not have this issue. The launch of AnyConnect from a Macbook Pro running OSX Leopard is not successful. The VPN gateway is ASA running 8.0.4. The connection fails and the SVC Message: 16/ERROR: Initialization failure (mem allocfailed, etc.) error message appears. This can be a problem with the way the MAC machine attempts to connect to the ASA. First verify if any IPv6 adaptors are enabled on the MAC machine and check if MAC tries to contact ASA over the IPv6 network. If so, it fails as the IPv6 is not supported with AnyConnect.